Remodelaholic | DIY Pocket Door Set up

Comply with this DIY pocket door set up information to discover ways to grasp a pocket door on the monitor inside a body, plus our particular software for lifting the pocket door into place. 

Learn extra about the right way to set up a pocket door body and watch the total pocket door body set up video tutorial right here. 

DIY Pocket Door Installation Video Tutorial, Place Door On Track, Remodelaholic

DIY Pocket Door Set up

We love pocket doorways to save lots of flooring area in tight areas, small rooms the place each sq. foot counts like

  • loos
  • closets
  • pantries
  • or laundry rooms.

Putting in a pocket door system permits more room within the room and within the hallway (and area for issues like our toilet built-ins!).

We determine we regain 8-10 sq. toes of flooring area by eradicating the swinging door and putting in a pocket door.

Learn our overview of the pocket door set up course of (from one among our first homes!) after which we now have a more moderen video that particulars the method of putting in the pocket door body.

The expense, labor, and time concerned are greater than made up for by the added perform and saved sq. toes of flooring area!

This publish accommodates affiliate hyperlinks. Be taught extra and skim our full disclosure coverage right here. 

There are few steps within the technique of a pocket door set up:

  1. Take away the door and hinges, and take away the door jamb (door body and trim).
  2. Fastidiously take away the drywall round sides of the wall across the door opening.*
  3. Take away the wall studs or different framing lumber that’s within the space the place the pocket door body will go.**
  4. Set up a brand new header the size of the pocket door body, within the opening you simply created.
  5. Set up the pocket door body package.
  6. Reinstall the drywall (and tape, mud, and many others) — taking care that the drywall screws are the right size.
  7. Set up the pocket door {hardware} and grasp the door. (That is the step we’re specializing in immediately.)
  8. Reinstall the door jambs (door body and trim) and set up the pocket door guides.
  9. Set up the pocket door handles and latch.

*Earlier than starting any pocket door or drywall work, suppose the place the plumbing could be, and use a voltage tester to test for {the electrical} wires across the door body — crucial security step!

**You’ll additionally need to use a stud finder to test the place your studs and framing are positioned, to know the scope of the venture earlier than you begin. You additionally must know if the wall area is a  load-bearing wall or not. 

If you’re uncertain or uncomfortable working with {the electrical} elements or the wanted framing, seek the advice of an expert electrician or structural engineer.

 

Our pocket door set up video reveals how we put in a pocket door body package (steps 1-6) for our Jordan Home toilet.

 

As we speak we’re displaying you ways we put the door on the monitor for one more pocket door in our Birch Home basement (step 7).

 

See also  DIY Child Altering Desk Topper

We’re putting in a brand new stable wooden flat panel door on this 32-inch pocket door body we purchased at Dwelling Depot. (The width of your pocket door body depends upon the width of your door body, however this a reasonably commonplace measurement door peak and width.)

See extra: Hanging Stable Wooden Panel Doorways within the Basement

We’ll have one other video developing about putting in the pocket door deal with and latch, so be sure you subscribe right here and tell us what questions you’ve about pocket doorways!

Need the ground area financial savings of a pocket door without having to put in a body within the wall? Rolling barn doorways are an ideal choice (and so they don’t must appear to be a barn!). See our picks for barn doorways and {hardware}.

Pocket Door Body Equipment & {Hardware}

Your pocket door set up package will include each the body to put in within the wall (see how right here) and the {hardware} wanted to hold the pocket door on the monitor.

The items might differ a bit between producers, however our pocket door package accommodates these items:

Pocket Door Installation Hardware To Hang Door On Track, Via Home Depot
picture by way of Dwelling Depot
  • Angled wrench, particular for pocket door {hardware}
  • 4 lengthy screws
  • 2 quick screws
  • 2 clip-in brackets (to be mounted on the door)
  • 2 plastic pocket door guides (for the underside of the door body)
  • 2 rolling door {hardware} brackets with 3 wheels every

Pocket Door Installation Hardware To Hang The Door On The Track, Remodelaholic

Step-by-Step Pocket Door Set up Directions

After you’ve put in the pocket door body and reinstalled the drywall, you’re prepared to hold the door on the pocket door monitor sytem!

See also  3 Years Later: Desk Noticed Workbench Replace and FAQs

This can be a model new door, however the steps are the identical whether or not you’re utilizing your current door or a brand new door.

Watch the video right here.

Step 1: Connect the Clip-In Bracket {Hardware} to the Prime of Door

Pocket Door Installation, Measure For Hardware Remodelaholic

Measure and mark the middle of the highest of the door on the appropriate {hardware} location.

You’ll want to learn your producer directions as a result of this will differ a bit, however typically it’s centered on the door a couple of inches in from the edges of the door. 

Pocket Door Installation Hardware To Clip Into Rolling Track Wheels, Remodelaholic

Use the supplied screws to connect the clip-in bracket {hardware} to the highest of the pocket door.

Take note of the course of the pivoting clip so it’s oriented accurately to make it simple to put in.

Step 2: Set up Rolling Door {Hardware} on the Observe

As proven within the video, you need to just be sure you have the rolling door {hardware} wheels turned reverse one another.

One set of wheels has the 2-wheels facet on one facet of the monitor, and the opposite set of wheels has the 2-wheel facet on the opposite monitor.

Pocket Door Installation Hardware, Rolling Wheel Orientation, Remodelaholic

A standard criticism of older pocket doorways is that they will come off the monitor — and this {hardware} setup helps repair that downside by making it a safer and secure connection on the monitor.

Roll the {hardware} into the monitor.

Pocket Door Installation Hardware Rollers On Track, Remodelaholic

Step 3: Clip The Pocket Door Bracket into the Rolling Door {Hardware}

Now it’s time to clip the pocket door bracket to the wheels which might be within the monitor.

In case you have an additional buddy readily available to assist, this a part of the job goes way more simply.

If you happen to don’t have a buddy to assist (or in case your buddy can be your digital camera operator, like in our video) — right here’s my secret weapon for doing the job solo! 

I’ve had this Pocket Kicker drywall lifter software for years and used it many instances as I’ve been engaged on our basement and different initiatives alone.

(You will get comparable mini drywall lifter instruments on-line or at Dwelling Depot or Lowe’s, or any ironmongery shop.)

Pocket Kicker Drywall Lifter To Help Install Pocket Door, Via Amazon
picture by way of Amazon

A drywall kicker like this additionally useful gizmo for lifting a pocket door into place whilst you clip it within the rolling door {hardware}!

See also  Industrial Charm: 10 Edgy and Stylish Home Decor Ideas

Our doorways are stable wooden and heavy, so this little software made it a lot simpler.

Pocket Door Installation, Use Drywall Kicker To Lift Door Into Place, Remodelaholic

Find out how to Elevate a Pocket Door to Hold on the Observe and Rollers

  1. Place the pocket door underneath the monitor.
  2. Slide the lifter software beneath the sting of the door on the facet closest to the wall opening.
  3. Use your foot to lever the software and raise the pocket door the few additional inches to satisfy up with the {hardware} within the monitor.
  4. Insert the knob a part of the curler {hardware} into the bracket on the door. The supplied wrench is useful for getting it in the precise spot.
  5. Slide the lever on the pocket door {hardware} to clip within the rolling {hardware}. You’ll most likely want to make use of the supplied wrench to verify the latch is closed totally.

Fastidiously roll the door over a bit, if wanted, to place for the opposite {hardware}, and repeat to clip within the different bracket.

Pocket Door Installation Hardware Attach Door To Roller, Remodelaholic

It takes slightly little bit of persistence and a gentle hand is all.

Step 4: Stage the Pocket Door

A protracted 48″ stage is a should for any Remodelaholic, and is nice for leveling a pocket door.

Pocket Door Installation And Leveling, Remodelaholic

To make changes to the pocket door for stage, you’ll simply use the angled wrench to regulate the {hardware} up or down till it’s stage, as proven within the video.

What’s Subsequent: Pocket Door Deal with & Latch

To complete out the pocket door system, we have to set up the door handles, latch, lock , bumper or door cease. (Video coming, so be sure you subscribe to our channel or to our our electronic mail publication).

We’ll additionally re-install all the highest and facet jambs of the door body trim in addition to the pocket door guides from the package.

Contemplating putting in a pocket door in your house? Tell us what questions you’ve — we’d love to assist!

You’ll additionally love these door DIYs:

 

Pocket Door Installation Guide Video Tutorial, Remodelaholic

Source link